Working with ASME VIII-2 chapter 5: “Design by Analysis”
Self-Paced Course
4 modules
Harald Ottens, MSc
SPC141
Format:
On-demand
€280 For Teams
Get a 20% discount on all courses for you and your team.
FREE Course Preview
Help yourself with your purchasing decision. Watch free content now.
Course Objective
"To give engineers, that use FEM a solid understanding of the assessments and compliance checks required as per ASME VIII-2 “Design by Analysis”.
Learn from home
100% online training
Video lectures by Experts
watch multiple times
Start immediately
1- year unlimited access
PDH hours qualified course
Read more here.
About the course
Self-paced
1 year access
4 modules
3 hours
SPC141
The ASME Boiler & Pressure Vessel section VIII code is the most frequently used pressure vessel design code in the world. Two design approaches are present in the code: design by rules and design by analysis. Design by Analysis in ASME VIII-2 Part 5 is used to complement the Design by Rules parts of the code. Why might this be necessary? Perhaps a feature is located too close to a discontinuity or has a non-standard configuration, perhaps a detailed fatigue calculation is required or loadings other than pressure are present?
This course covers how to conduct Design by Analysis code compliance checks for rupture, ratcheting, fatigue and buckling load cases.
During which topics such as the difference between primary or secondary stresses, the influence of weld type on fatigue life and obtaining the structural stress will be addressed using FEM software.
The course consists of 5 online, self-study modules combined with 2 online live sessions with the instructor. All training content is provided through your EngineeringTrainer account.
After the course you maintain 1-year unlimited access to the course. This allows you to perform modules again when you need to refresh the knowledge for your projects.
Questions? Contact us
hello@engineeringtrainer.com
+31 (0)85 058 0051
Monday - Friday, 9am - 6pm CEST
Join the Program
Team or Personal
Enroll directly by purchasing the program. Use the "Add to Cart" button at the top of this page. Pay by creditcard, PayPal, or bank transfer.
Need your employer to process the payment? Use the link below.
To register multiple team-members at once, use the link below.
Want a dedicated version of this Program for your team? Please contact us.
Meet your instructors
Program & Details
Welcome & Your instructors
Content Overview
How to use this course
Personal Certificate requirements
Introduction and Agenda
ASME VIII-2 Chapter 5 ''Design by Analysis''
Failure model evaluated in Chapter 5
Code revisions of Section VIII division 2
Stress values from FEA
Focus of the course
Introduction and Agenda
Evaluating Plastic Collapse 3 Methods
Method 1 Elastic analysis
Method 2 Limit load analysis
Method 3 Elastic-plastic analysis
Comparing 3 methods against Plastic Collapse
Stress linearization of FEA results
What is ratcheting? An introduction
Compliance check for ratcheting failure
Simplified elastic/plastic analysis method
Elastic/plastic analysis method
Fatigue failure and micro cracks
Analysing fatigue Assessment methods
Method A: Smooth bar method
Method B: Welded curve method
Evaluating local failure & compliance checks
Evaluating buckling & compliance checks
Congratulations
Course evaluation survey
Your Personal Certificate
Rate this course
Related resources & follow up
Results
After this course, you...
understand the General Definitions and Failure Mechanisms associated with ASME VIII-2 Ch. 5 (Design by Analysis) assessments,
have a good overview of the code section,
can perform Stress Categorization and are able to link results to failure mechanisms,
have seen numerous practical examples with Shell and Brick Finite Element Models,
know the concepts of Stress Linearization and are able to apply them,
understand Fatigue Analysis using both Welded and Smooth Bar Methods.
Who should attend this course
Those using Finite Element Analysis for pressure vessel design,
People involved in projects for which the ASME VIII-Div. 2 Design by Analysis is used,
People that need to read technical reports related to this topic,
Beginner and intermediate pressure vessel designers.
Prerequisites:
Basic understanding of Finite Element Analysis
Level: Intermediate
Content
The course utilizes pre-recorded lectures and self-study exercises, combined with live Q&A's and discussions. Live events are provided through MS Teams for which links are distributed from your course dashboard. Note that no downloadable manual is provided in this course as it is completely provided through our interactive portal.
You receive 1-year unlimited access to the course. This allows you to perform modules again should you need to refresh knowledge for your work projects.
This course is self-paced and is not subject to specific dates. The course contains 4 modules with a total of 3 hours of content which can be performed at your own pace. A Personal Certificate will be provided to participants if they finish the course within the first month after purchase. This incentive will motivate you to perform the course quickly thereby improving your learning curve.
You receive 1-year unlimited access to all modules, should you wish to refresh your knowledge.
Example Certificate:
Join the Program
Team or Personal
Enroll directly by purchasing the program. Use the "Add to Cart" button at the top of this page. Pay by creditcard, PayPal, or bank transfer.
Need your employer to process the payment? Use the link below.
To register multiple team-members at once, use the link below.
Want a dedicated version of this program for your team? Please contact us.
FAQ
Video lectures
Tutorials with worked solutions
Videos will not be available for download, but can be accessed directly with your account on the portal. If slides are used in the videos or live sessions these can be viewed separately as well through the portal, but are not available for download.
You receive 1-year unlimited access to the course. This allows you to watch content again if this is beneficial for your work projects.
No, it is not possible to ask questions to the trainer. It is possible to submit comments and ideas for new topics and modules.
No software is required for participants of this course.
If your computer and internet connection are able to play videos online you will be able to follow the course. Note that almost all browsers are supported, except for Internet Explorer.
Yes, this course qualifies for PDH hours as per the NCEES CPC Guidelines.
Once the user has seen at least one product this snippet will be visible.
Recommended for you
Related Courses
