Buried Piping Engineering using CaesarII

    749.00 € 749.00 € 749.0 EUR

    749.00 €

    This combination does not exist.

    ENROLL

    Instructor-led Live Sessions
    Starts January 20th
    8 Live Sessions
    Mick Bouman, MSc
    ILL013


    Course Objective

    "To provide you with a solid understanding of the different technical and design aspects involved with buried piping and the ability to analyze them."

    Learn from home
    100% online training

    Video Lectures by Experts

    connect with them online

    6-month access

    to recordings and material

    PDH Hours qualified course

    Read more here

    About the course


       Instructor-led

       8 Live sessions

       8 Weeks

       Starts Jan. 20

       1.5-2hr /week

      English

       Limited seats

       ILL013

    Are you actively involved with technical issues involving buried industrial piping? This course teaches you the basic technical knowledge of soil mechanics and its influence on underground piping. After the course you will have a solid understanding of the different technical aspects involved in buried piping. This makes the training course especially valuable for piping engineers, but also provides valuable information for operators, supervisors, technicians, and plant managers. 

    Topics include relevant design codes (e.g. NEN 3650, ATV, AWWA), Solutions to typical stress problems, underground pipe supporting and thrust blocks, awareness of the critical aspects, potential failure mechanisms, identify potential field and design issues and the differences between buried steel and non-steel piping.

    The instructor provides an interactive online training including field examples and case studies. The course consists of 8 interactive, online live sessions provided by the instructor. Recordings, exercise files and models and other related training content are provided through our online portal.

    An active CaesarII license is required for this course. This is not included in the course. Please contact us for questions on this matter.

    Download BrochureCourse Brochure for Buried Piping Engineering using CaesarII

    Meet your instructor


    Mick Bouman, MSc

    Project Engineer, Dynaflow Research group


    Mechanical, Piping, FEA, Flow


    Frank Bos, PhD

    Project Manager, Dynaflow Research group


    Mechanical, Piping, FEA, CFD


    Program & Details


    1. Welcome to the course

    2. Your instructors

    3. How to use this course

    4. Personal Certificate requirements

    1. Lecture: Introduction to Buried Piping

    2. Lecture: Introduction to Fundamentals of Soil Mechanics

    3. Introduction of exercises

    Exercises files available after this session:

    1. Exercise 1: Longitudinal and Hoop Stresses in Buried Pipe

    2. Exercise 2a: Calculating Soil Parameters for Caesar II input


    1. Lecture: Soil-Pipe Interaction Part I

    2. Discussion and demonstration of exercise 1: Longitudinal and Hoop Stresses in Buried Pipe

    3. Discussion and demonstration of exercise 2a: Calculating Soil Parameters for Caesar II input

    4. Introduction of exercises

    Exercises files available after this session:

    1. Exercise 2b: Implementing Soil Parameters in Caesar II

    2. Exercise 4: Virtual Anchor Length a Useful Tool to Truncate Your Model 


    1. Lecture: Introduction to FEM and Buried Pipe Modeling in CAESAR II

    2. Discussion and demonstration of exercise 2b: Implementing Soil Parameters in Caesar II

    3. Discussion and demonstration of exercise 4: Virtual Anchor Length, a useful tool to truncate your pipe model

    4. Introduction of exercises

    Exercises files available after this session:

    1. Exercise 5: Upheaval buckling of long buried pipe

    1. Lecture: Soil-Pipe Interaction Part II

    2. Underground pipe supporting and thrust blocks

    3. Discussion and demonstration of exercise 5: Upheaval buckling of long buried pipe

    1. Lecture: Buried Piping Codes (NEN 3650, ATV, AWWA, other) - part 1

    2. Lecture: Buried Piping Codes (NEN 3650, ATV, AWWA, other) - part 2

    3. Introduction of exercises

    Exercises files available after this session:

    1. Exercise 3: Stresses in Road Crossing Pipe

    1. Lecture: Buried Piping Codes (NEN 3650, ATV, AWWA, other) - part 3

    2. Discussion and demonstration of exercise 3: Stresses in Road Crossing Pipe

    3. Introduction of exercises

    Exercises files available after this session:

    1. Exercise 7: GRP Firewater System

    2. Exercise 8: Shallow buried GRP pipe failure

    1. Lecture: Remaining Topics

    2. Awareness in the critical aspects of buried piping

    3. Discussion and demonstration of exercise 7: GRP Firewater System

    4. Discussion and demonstration of exercise 8: Shallow buried GRP pipe failure

    1. Summary of most critical and challenging topics

    2. Additional Q&A

    1. Congratulations

    2. Course evaluation survey

    3. Your Personal Certificate

    4. Rate this course

    5. Related resources & follow up

    Results

    After this course, you...

    • Have a good understanding of theoretical and practical aspects involved with realizing buried industrial piping systems,

    • Know how to apply ground entries, underground supporting, thrust blocks and road crossings,

    • Are able to perform pipe stress analysis in CaesarII,

    • Know potential critical issues and related failure mechanisms,

    • Understand the difference between steel and non-steel for buried piping.


    Who should attend this course

    • Pipe stress engineers involved with buried piping systems in industrial environments,

    • Those involved in design, installation or maintenance of buried piping systems.

    Prerequisites: 

    • Basic understanding piping systems.

    • Basic user knowledge of the CaesarII software.

    Level: Intermediate

    This course consists of 8 instructor-led live sessions which consists of presentations, demonstrations and discussions of questions. During each session, participants can ask questions to the instructor (through chat or microphone) which will be answered. After each live session the recording of that session, used slides and exercise documents are made available to participants to view again. If desired by the instructor, exercise files are provided at the end of a session that will be discussed in the next session. These should be performed by the participant before they are discussed in the upcoming live session.

    Access to the course
    After your purchase is confirmed you receive an account to the EngineeringTrainer online learning portal, where you find the course welcome chapter and instructions on how to join the live sessions. Sessions are held using the software GoToMeeting and a log-in link is provided for each session through the portal. A test link is provided from the start such as to test if you are able to properly join the sessions prior to the first session. Live sessions can be joined using any device, including tabled and mobile. 

    You receive 6-months unlimited access to the course. This allows you to watch content again if this is beneficial for your work projects.

    The live sessions for this course take place at the following moments:

      • Session 1: January 20, 9am CET (1 hr) (convert time-zones)

      • Session 2: January 27, 9am CET (1 hr)

      • Session 3: February 3, 9am CET (1 hr)

      • Session 4: February 10, 9am CET (1 hr)

      • Session 5: February 17, 9am CET (1hr)

      • Session 6: February 24, 9am CET (1 hr)

      • Session 7: March 3, 9am CET (1 hr)

      • Session 8: March 10, 9am CET (1 hr)

    After the course you receive 6-months unlimited access to all course material including recordings of the live sessions. This allows you to watch recording of lectures again whenever you need to refresh knowledge for your daily work projects.

    A personal digital certificate will be made available to each participant upon full attendance. If you are unable to attend any of the sessions please notify us as we will require to view the recordings.

    Example Certificate:

    Example Certificate of Completion

    FAQ

    This course consists of 8 instructor-led live sessions which consists of presentations, demonstrations and discussions of questions. During each session participants can ask questions to the instructor (through chat or microphone) which will be answered.

    After each live session the recording of that session, used slides and exercise documents are made available to participants to view again. If desired by the instructor, exercise files are provided at the end of a session that will be discussed in the next session. These should be performed by the participant before they are discussed in the upcoming live session.

    Yes, interactive Q&A sessions are included in this course that allow you to interact with the instructor and ask questions.

    An active CaesarII license is required for this course. This is not included in the course. Please contact us for questions on this matter.

    Yes, this course qualifies for PDH hours as per the NCEES CPC Guidelines.

    Start immediately

    Require company payment?

    Want team access?

    Related Courses


    Videos on YouTube


    Subscribe & Follow

             

    Questions? Contact Us


    Training Coordinator & Engineer Luuk Hennen, MSc

    Luuk Hennen    
    Product specialist

      sales@engineeringtrainer.com

       +31 (0)85 058 0051
            Monday - Friday, 9am-6pm CEST