Water Hammer Analysis: Advanced topics

    375.00 € 375.00 € 375.0 EUR

    375.00 €

    This combination does not exist.

    ENROLL

    Regular fee € 750
    Instructor-led Live Sessions
    starts June 2
    4 Live Sessions
    Frank Bos, PhD
    ILL120


    Learn from home
    100% online training

    Lectures by Industry Experts
    connect with them online

    6-month access
    to recordings and material

    Receive Personal Certificate
    and prove your knowledge

    Dynaflow Research Group currently applies a 50% discount to all its online courses to service its
    customers during these challenging times,

    Regular fee: € 750,-
    Current fee: € 375,-

    About the course


       Instructor-led

       4 Live sessions

       4 Weeks

       Starts June 2

       1-2hr /week

      English

       Limited seats

       ILL120

    This course covers advanced analysis techniques required for water hammer and surge pressure assessment in industrial piping systems:

    • Topic 1: The balancing of large piping systems with multiple open outlets.
      For such systems it can be hard to obtain a good steady state condition and reliable transient results.

    • Topic 2: Using and scaling vacuum breakers and air valves to avoid vacuum conditions associated with pump trips scenarios.

    • Topic 3: Application and sizing of surge vessels to dampen pressure surges.

    • Topic 4: Filling of an empty line.

    • Topic 5: Water hammer assessment of a large firewater system.

    Discussions and analyses will be illustrated using the software BOSfluids. No knowledge of this software is required.


    Questions? Contact us

      sales@engineeringtrainer.com

       +31 (0)85 058 0051
            Monday - Friday, 9am - 6pm CEST



    Meet your instructor


    Frank Bos, PhD
    Project Engineer, Dynaflow Research group


    Mechanical, Piping, FEA, CFD


    Program & Details


    1. Welcome to the course

    2. Your instructors

    3. How to use this course

    4. Personal Certificate requirements

    1. Analyzing steady state conditions

    2. The importance of steady state conditions for transient analysis

    3. Potential steady state issues

    4. Balancing & verifying the flow in assessments of large systems

    1. Scenario discussion: pump trips

    2. Factors that determine associated pressure surges

    3. Evaluating a pump trip scenario with and without vacuum breakers

    1. Using surge vessels to reduce water hammer

    2. How to size a surge vessel

    1. Scenario discussion: filling an empty line

    2. Evaluating a real-life case of line filling

    3. System discussion: firewater system with many outlets

    1. Congratulations

    2. Course evaluation survey

    3. Your Personal Certificate

    4. Rate this course

    5. Related resources & follow up

    Results

    After this course, you...

    • understand the challenges and solutions associated with pressure surge analyses of large piping systems with multiple open outlets,

    • know how to implement surge vessels as a mitigation measure and how to size them,

    • understand how and when to implement vacuum breakers and air valves and how to size them,

    • are familiar with analyzing the filling of an empty line and are able to do so in BOSfluids,

    • are able to analyze water hammer in large firewater systems and interpret the results.

    Who should attend this course

    • Engineers involved with pressure surge & water hammer analysis that want to deepen their understanding of advanced analysis techniques.

    Prerequisites:

      • Basic experience with pressure surge analysis. 

      • Discussions and analyses will be illustrated using the software BOSfluids. No knowledge of this software is required.

    Level: Experienced

    This course consists of 4 instructor-led live sessions which consists of presentations, demonstrations and discussions of questions. During each session, participants can ask questions to the instructor (through chat or microphone) which will be answered. After each live session the recording of that session, used slides and exercise documents are made available to participants to view again. If desired by the instructor, exercise files are provided at the end of a session that will be discussed in the next session. These should be performed by the participant before they are discussed in the upcoming live session.

    Access to the course
    After your purchase is confirmed you receive an account to the EngineeringTrainer online learning portal, where you find the course welcome chapter and instructions on how to join the live sessions. Sessions are held using the software GoToMeeting and a log-in link is provided for each session through the portal. A test link is provided from the start such as to test if you are able to properly join the sessions prior to the first session. Live sessions can be joined using any device, including tabled and mobile. 

    You receive 6-months unlimited access to the course. This allows you to watch content again if this is beneficial for your work projects.

    Dates & Schedules

    The live sessions are scheduled twofold to service participants in different time-zones. Upon enrollment each participant is appointed to a group based on their preferences.

    • Group A (Asia, Middle East, Europe, Africa, Australia) - REGISTRATION CLOSED

      • Session 1: May 20, 9:00am CEST (1hr) (convert time-zones)

      • Session 2: May 27, 9:00am CEST (1hr)

      • Session 3: June 3, 9:00am CEST (1hr)

      • Session 4: June 10, 9:00am CEST (1hr)


    • Group B (North & South America, Europe, Africa)

      • Session 1: June 2, 3:30pm CEST (1hr) (convert time-zone)

      • Session 2: June 9, 3:30pm CEST (1hr)

      • Session 3: June 16, 3:30pm CEST (1hr)

      • Session 4: June 23, 3:30pm CEST (1hr)

    After the course you receive 6-months unlimited access to all course material including recordings of the live sessions. This allows you to watch recording of lectures again whenever you need to refresh knowledge for your daily work projects.

    A personal digital certificate will be made available to each participant upon full attendance. If you are unable to attend any of the sessions please notify us as we will require to view the recordings.

    Example Certificate:


    FAQ

    This course consists of 4 instructor-led live sessions which consists of presentations, demonstrations and discussions of questions. During each session participants can ask questions to the instructor (through chat or microphone) which will be answered.

    After each live session the recording of that session, used slides and exercise documents are made available to participants to view again. If desired by the instructor, exercise files are provided at the end of a session that will be discussed in the next session. These should be performed by the participant before they are discussed in the upcoming live session.

    Exercise files can be downloaded, these can include .pdf files with the exercise questions, software models or other file types. Videos will not be available for download, but can be accessed directly with your account on the portal. If slides are used in the videos or live sessions these can be viewed separately as well through the portal, but are not available for download. You receive 6-months unlimited access to the course. This allows you to watch content again if this is beneficial for your work projects.

    Yes, interactive Q&A sessions are included in this course that allow you to interact with the instructor and ask questions.

    No software is required for participants of this course.

    Demonstrations are provided using the software BOSfluids, but having access to this software is not required.

    Start immediately 

    Require company payment?

    Want team access?

    Related Courses


    Videos on YouTube


    Subscribe & Follow

             

    Questions?


    Contact our Training Coordinator


    Luuk Hennen    
    Product specialist

      sales@engineeringtrainer.com

       +31 (0)85 058 0051
            Monday - Friday, 9am-6pm CEST