Regular fee € 1000
Instructor-led Live Sessions
starts May 6, 2020
4 Live Sessions
Daniel van Baalen, MSc
Learn from home
100% online training
Lectures by Industry Experts
connect with them online
to recordings and material
Receive Personal Certificate
and prove your knowledge
Dynaflow Research Group currently applies a 50% discount to all its online courses to service its
customers during these challenging times,
Regular fee: € 1000,-
Current fee: € 499,-
About the course
4 Live sessions
Starts May 6
2 hr /week
This course teaches you all the fundamentals of working with FEPipe.
Many different aspects of FEPipe are covered, including the analysis of typical geometries such as heads and nozzles, but also custom attachments, build using plates, and assemblies of multiple models are discussed. The entire workflow is covered in detail including visual model verification, boundary conditions and result viewing options.
There will also be extensive seminars on Part 5 of the ASME BPVC VIII-2 so that participants become proficient in conducting a “Design by Analysis” assessment.
The course consists of 4 interactive, online live sessions provided by the instructor. Recordings and related training content are provided through our online portal.
Questions? Contact us
+31 (0)85 058 0051
Monday - Friday, 9am - 6pm CEST
Meet your instructor
Program & Details
Welcome to the course
How to use this course
Personal Certificate requirements
Introduction to FEA
FEA basic set of equations
FEPipe FEM elements
Mesh resolution & singularities
The PRG Software Suite: an overview
Templates & capabilities of FEPipe
Introduction ASME VIII-2 Chapter 5: Design by Analysis
Primary vs. secondary stress
Membrane, bending & peak stress
Considered failure modes
Compliance checks & allowable stress values
The Nozzle-Shell template
FEPipe file handling
FEPipe boundary conditions
- Stress categorization
Exercise provided after the session:
- Basic FEPipe Model
- A vessel with various nozzles
- Vessle/Nozzle Geometry with nozzle end loads
Discussion of exercise: Stress categorization
Visual model verification
Results visualization methods
Demonstration of exercises
Considerations for Nozzle-Piping interactions
Method 1: Generating and using SIFs for your piping model
Importance & limitations
Calculating SIFs in FEPipe
Method 2: Including piping in your FEPipe model using strings
Exercise provided after the session:
Modeling Piping Actions
Demonstration of exercise: Modeling Piping Actions
Concepts of plate groups in FEPipe
Circumferential & longitudinal plates
Building custom structural attachments
Attachment boundary conditions & loads
Structural Attachments example case
How to use database operations
Setup your model components
Parent vs. child models
Course evaluation survey
Your Personal Certificate
Rate this course
Related resources & follow up
After this course, you...
are familiar with the FEPipe Interface,
know how to work with the templates in FEpipe,
understand Stress Categorization as per ASME BPVC VIII-2,
know how to visually verify model settings & mesh,
can build custom structures in FEPipe using plates,
are able to combine models to analyze complete geometries,
know how to model piping actions and calculate SIFs.
This course is based on the latest release of the FEPipe software (v14.0).
Who should attend this course
Users of FEPipe & other PRG Suite items.
Beginner FEPipe users that need to learn the fundamentals of working with the software.
Intermediate NozzlePRO users that want to understand more about the different features.
Those that want to understand more about the capabilities of FEPipe.
Those conducting ASME VIII-2 assessments.
Prerequisites: No prior knowledge of FEPipe is required.
This course consists of 4 instructor-led live sessions which consists of presentations, demonstrations and discussions of questions. During each session, participants can ask questions to the instructor (through chat or microphone) which will be answered. After each live session the recording of that session, used slides and exercise documents are made available to participants to view again. If desired by the instructor, exercise files are provided at the end of a session that will be discussed in the next session.
Access to the course
After your purchase is confirmed you receive an account to the EngineeringTrainer online learning portal, where you find the course welcome chapter and instructions on how to join the live sessions. Sessions are held using the software GoToMeeting and a log-in link is provided for each session through the portal. A test link is provided from the start such as to test if you are able to properly join the sessions prior to the first session. Live sessions can be joined using any device, including tabled and mobile.
You receive 6-months unlimited access to the course. This allows you to watch content again if this is beneficial for your work projects.
The live sessions are scheduled twofold to service participants in different time-zones. Upon enrollment each participant is appointed to a group based on their preferences.
Group A (Asia, Middle East, Europe, Africa, Australia)
Session 1: May 7, 10:30am CEST (convert time-zone)
Session 2: May 12, 10:30am CEST
Session 3: May 26, 10:30am CEST
Session 4: June 16, 10:30am CEST
Group B (North & South America, Europe, Africa)
Session 1: May 6, 3:30pm CEST (1.5hr) (convert time-zone)
Session 2: May 11, 3:30pm CEST (1.5hr)
Session 3: May 18, 3:30pm CEST (1.5hr)
Session 4: May 25, 3:30pm CEST (1.5hr)
After the course you receive 6-months unlimited access to all course material including recordings of the live sessions. This allows you to watch recording of lectures again whenever you need to refresh knowledge for your daily work projects.
A personal digital certificate will be made available to each participant upon full attendance. If you are unable to attend any of the sessions please notify us as we will require to view the recordings.
This course consists of 4 instructor-led live sessions which consists of presentations, demonstrations and discussions of questions. During each session participants can ask questions to the instructor (through chat or microphone) which will be answered.
After each live session the recording of that session, used slides and exercise documents are made available to participants to view again. If desired by the instructor, exercise files are provided at the end of a session that will be discussed in the next session. These should be performed by the participant before they are discussed in the upcoming live session.
Exercise files can be downloaded, these can include .pdf files with the exercise questions, software models or other file types. Videos will not be available for download, but can be accessed directly with your account on the portal. If slides are used in the videos or live sessions these can be viewed separately as well through the portal, but are not available for download. You receive 6-months unlimited access to the course. This allows you to watch content again if this is beneficial for your work projects.
Yes, interactive Q&A sessions are included in this course that allow you to interact with the instructor and ask questions.
An active FEPipe license is recommended for this course. This is not included in the course. Please contact us for questions on this matter.
Because of the current work-from-home conditions around the world as a result of the COVID-19 virus an active license is not mandatory!