FEPipe Fundamentals

    499.00 € 499.00 € 499.0 EUR

    499.00 €

    This combination does not exist.

    ENROLL

    Regular fee € 1000
    Instructor-led Live Sessions
    starts May 6, 2020
    4 Live Sessions
    Daniel van Baalen, MSc
    ILL124


    Learn from home
    100% online training

    Video Lectures by Experts
    connect with them online

    6-month access
    to recordings and material

    Receive Personal Certificate
    and prove your knowledge

    Dynaflow Research Group currently applies a 50% discount to all its online courses to service its
    customers during these challenging times,

    Regular fee: € 1000,-
    Current fee: € 499,-

    About the course


       Instructor-led

       4 Live sessions

       4 Weeks

       Starts May 6

       2 hr /week

      English

       Limited seats

       ILL124

    This course teaches you all the fundamentals of working with FEPipe.

    Many different aspects of FEPipe are covered, including the analysis of typical geometries such as heads and nozzles, but also custom attachments, build using plates, and assemblies of multiple models are discussed. The entire workflow is covered in detail including visual model verification, boundary conditions and result viewing options.

    There will also be extensive seminars on Part 5 of the ASME BPVC VIII-2 so that participants become proficient in conducting a “Design by Analysis” assessment.

    The course consists of 4 interactive, online live sessions provided by the instructor. Recordings and related training content are provided through our online portal.

    Questions? Contact us

      sales@engineeringtrainer.com

       +31 (0)85 058 0051
            Monday - Friday, 9am - 6pm CEST





    Meet your instructor


    Daniel van Baalen, MSc

    Project Engineer, Dynaflow Research group


    Mechanical, Piping, FEA, Flow


    Program & Details


    1. Welcome to the course

    2. Your instructors 

    3. How to use this course

    4. Personal Certificate requirements

    1. Introduction to FEA

    2. FEA basic set of equations

    3. FEPipe FEM elements

    4. Mesh resolution & singularities

    5. The PRG Software Suite: an overview

    6. Templates & capabilities of FEPipe

    7. Introduction ASME VIII-2 Chapter 5: Design by Analysis

    1. Equivalent stresses

    2. Primary vs. secondary stress

    3. Membrane, bending & peak stress

    4. Considered failure modes 

    5. Stress categorization 

    6. Compliance checks & allowable stress values

    7. The Nozzle-Shell template

    8. FEPipe file handling

    9. Using MatPRO

    10. FEPipe boundary conditions


    Exercise provided after the session:

        Stress categorization

        Basic FEPipe Model
        - A vessel with various nozzles
        - Vessle/Nozzle Geometry with nozzle end loads

    1. Discussion of exercise: Stress categorization

    2. Visual model verification

    3. Mesh verification

    4. Results visualization methods

    5. Demonstration of exercises

    6. Considerations for Nozzle-Piping interactions

    7. Method 1: Generating and using SIFs for your piping model

    8. Importance & limitations

    9. Calculating SIFs in FEPipe

    10. Method 2: Including piping in your FEPipe model using strings

    Exercise provided after the session:
    Modeling Piping Actions

    1. Demonstration of exercise: Modeling Piping Actions

    2. Concepts of plate groups in FEPipe

    3. Circumferential & longitudinal plates

    4. Building custom structural attachments

    5. Mesh optimization

    6. Attachment boundary conditions & loads

    7. Structural Attachments example case

    8. How to use database operations

    9. Setup your model components

    10. Parent vs. child models

    1. Congratulations

    2. Course evaluation survey

    3. Your Personal Certificate

    4. Rate this course

    5. Related resources & follow up

    Results

    After this course, you...

    • are familiar with the FEPipe Interface,

    • know how to work with the templates in FEpipe,

    • understand Stress Categorization as per ASME BPVC VIII-2,

    • know how to visually verify model settings & mesh,

    • can build custom structures in FEPipe using plates,

    • are able to combine models to analyze complete geometries,

    • know how to model piping actions and calculate SIFs.

    This course is based on the latest release of the FEPipe software (v14.0).

    Who should attend this course

    • Users of FEPipe & other PRG Suite items.

    • Beginner FEPipe users that need to learn the fundamentals of working with the software.

    • Intermediate NozzlePRO users that want to understand more about the different features.

    • Those that want to understand more about the capabilities of FEPipe.

    • Those conducting ASME VIII-2 assessments.

    Prerequisites: No prior knowledge of FEPipe is required.

    Level: Foundations

    This course consists of 4 instructor-led live sessions which consists of presentations, demonstrations and discussions of questions. During each session, participants can ask questions to the instructor (through chat or microphone) which will be answered. After each live session the recording of that session, used slides and exercise documents are made available to participants to view again. If desired by the instructor, exercise files are provided at the end of a session that will be discussed in the next session.

    Access to the course
    After your purchase is confirmed you receive an account to the EngineeringTrainer online learning portal, where you find the course welcome chapter and instructions on how to join the live sessions. Sessions are held using the software GoToMeeting and a log-in link is provided for each session through the portal. A test link is provided from the start such as to test if you are able to properly join the sessions prior to the first session. Live sessions can be joined using any device, including tabled and mobile. 

    You receive 6-months unlimited access to the course. This allows you to watch content again if this is beneficial for your work projects.

    The live sessions are scheduled twofold to service participants in different time-zones. Upon enrollment each participant is appointed to a group based on their preferences.

    • Group A (Asia, Middle East, Europe, Africa, Australia)

      • Session 1: May 7, 10:30am CEST (convert time-zone)

      • Session 2: May 12, 10:30am CEST

      • Session 3: May 26, 10:30am CEST

      • Session 4: June 16, 10:30am CEST


    • Group B (North & South America, Europe, Africa)

      • Session 1: May 6, 3:30pm CEST (1.5hr) (convert time-zone)

      • Session 2: May 11, 3:30pm CEST (1.5hr)

      • Session 3: May 18, 3:30pm CEST (1.5hr)

      • Session 4: May 25, 3:30pm CEST (1.5hr)

    After the course you receive 6-months unlimited access to all course material including recordings of the live sessions. This allows you to watch recording of lectures again whenever you need to refresh knowledge for your daily work projects.

    A personal digital certificate will be made available to each participant upon full attendance. If you are unable to attend any of the sessions please notify us as we will require to view the recordings.

    Example Certificate:


    FAQ

    This course consists of 4 instructor-led live sessions which consists of presentations, demonstrations and discussions of questions. During each session participants can ask questions to the instructor (through chat or microphone) which will be answered.

    After each live session the recording of that session, used slides and exercise documents are made available to participants to view again. If desired by the instructor, exercise files are provided at the end of a session that will be discussed in the next session. These should be performed by the participant before they are discussed in the upcoming live session.

    Exercise files can be downloaded, these can include .pdf files with the exercise questions, software models or other file types. Videos will not be available for download, but can be accessed directly with your account on the portal. If slides are used in the videos or live sessions these can be viewed separately as well through the portal, but are not available for download. You receive 6-months unlimited access to the course. This allows you to watch content again if this is beneficial for your work projects.

    Yes, interactive Q&A sessions are included in this course that allow you to interact with the instructor and ask questions.

    An active FEPipe license is recommended for this course. This is not included in the course. Please contact us for questions on this matter.

    Because of the current work-from-home conditions around the world as a result of the COVID-19 virus an active license is not mandatory!

    Start immediately

    Require company payment?

    Want team access?

    Related Courses


    Videos on YouTube


    Subscribe & Follow

             

    Questions? Contact Us


    Luuk Hennen    
    Product specialist

      sales@engineeringtrainer.com

       +31 (0)85 058 0051
            Monday - Friday, 9am-6pm CEST