EN 13480: Metallic Industrial Piping Design Rules
Starts 14 October 2024
24hr Content
4 day program
19 Credits
Alan Stewart
VILT1901
Format:
Instructor-led
Reduced fees with a team account
Contact us to discover the benefits of a team account
Prefer a private in-company training?
Contact us to arrange one for this course.
Course Objective
“To give participants a comprehensive understanding of EN 13480 design code, which specifies requirements for industrial metallic piping systems and supports.”
Virtual Instructor-led
100% online training
Video Lectures by Experts
connect with them online
4 Days Immersion
Sessions through the day
PDH Hours qualified course
Read more here
About the course
Instructor-led
4 Sessions
4 Days
Starts: 14 October
Immersion
English
Limited seats
VILT1901
The EN 13480 design code specifies requirements for industrial metallic piping systems and supports, including safety systems, to ensure safe operation. This course starts with an in-depth discussion and introduction to the history of the EN 13480 code. We dive into the development of the EN 13480 code for Metallic Industrial Piping and how it has arisen from the consolidation of various other piping codes.
Participants are taken by the instructor through all the chapters of the EN13480. Among the topics discussed are the classification of piping systems, requirements for piping systems, and materials found in EN 13480. By explaining the rules and how to apply them, you will gain a better understanding of how to apply them to calculations and design.
The course consists of 4 days of online live sessions with the instructor, the program per day is split into 4 sessions with breaks. All training content is provided through your EngineeringTrainer account.
After the course you maintain 1-year unlimited access to the course, including any new course material. This allows you to perform modules again should you need to refresh your knowledge.
Meet your instructor
Program & Details
Introduction
History of the EN 13480 Code
EN 13480 Part 1: General
Scope
Terms, definitions, symbols and units
Classification of Piping Systems
Requirements for Piping systems
EN 13480 Part 2: Materials;
Materials and related standards
Werkstoff Numbers
Naming Designation
Chemical Composition
Comparable Materials
Material Data Sheets
Requirements for Brittle Fracture and Creep
Requirements for Fatigue Design
Material Certification
Non Destructive Examination
EN 13480 Part 3: Design and Calculation
Design Conditions
Hydrotest Conditions
Loadings and Load Combinations
Definition of Primary, Secondary and Occasional loads
Calculation of Piping Wall Thickness (tmin)
Example Problems: tmin calculations
Material Design Stresses
Design Conditions for Creep
Rules and Limitations for thin and thick walled components
Pressure Rating of Components
Flange Calculations to EN 1591 and EN 1092
Special Components
Stress Intensification Factors (SIFs)
EN 13480 Annex H
ASME B31. 1 Appendix D
ASME B31.3 Appendix D
ASME B31J Flexibility and Stress Analysis
Flexibility and Stress Analysis (continued)
Stress Range
Cold Pull
Loads to Be Considered
Normal operating conditions
Occasional operating conditions
Cleaning loading
Steam purge/blow loading
Exceptional operating conditions
Test Conditions
Special Consideration for Elevated Temperature
Pipe Supports
General Definitions for Supports
Selection of Pipe Supports
Detailed Design of Pipe Supports
Particular Material Appraisal
PMA Example Form
PMA General Guidelines
PMA Completed Example
Results
After this course, you...
have a fundamental understanding of the EN 13480 code for Metallic Industrial Piping Design Rules. Participants will be taken through all of the sections of the code and shown how the different sections refer to each other.
gain background knowledge of the development and application of the EN13480, and see why formulas or design rules are so as they are defined.
understand the classification of piping systems and the requirements of piping systems.
Who should attend this course
Engineers involved in the design of piping according to EN 13480
Engineers with basic experience using EN 13480
Prerequisites:
Background in piping design
Level: Intermediate
This course consists of 4 instructor-led live sessions which consist of presentations, demonstrations and discussions of questions. During each session, participants can ask questions to the instructor (through chat or microphone) which will be answered.
Access to the course
After your purchase is confirmed the course will be available to your EngineeringTrainer account, where you find the course welcome chapter and instructions on how to join the live sessions. Sessions are held using the software Microsoft Teams and a log-in link is provided for each session through the portal. Live sessions can be joined using any device, including tablets and mobiles.
The live sessions for this course take place at the following times (all times are 24hr clock):
Session 1: 14 October, 9:30 to 16:30 CET (Convert time-zone)
Session 2: 15 October, 9:30 to 16:30 CET
Session 3: 16 October, 9:30 to 16:30 CET
Session 4: 17 October, 9:30 to 16:30 CET
These sessions will feature breaks at regular intervals.
A personal digital certificate will be made available to each participant upon full attendance.
Example Certificate:
FAQ
This course consists of 4 instructor-led live sessions which consist of presentations, demonstrations and discussions of questions. During each live session participants can ask questions to the instructor (through chat or microphone) which will be answered.
Please note that for privacy reasons no recordings of the live sessions are made or provided.
The training material used in the live sessions, for example the slides or exercises, will be available in the EngineeringTrainer portal for a year after the date of the training allowing you to refresh your knowledge or review material if needed.
No, course content is not available for download.
The training material used in the sessions, for example the slides or exercises, will be available in the EngineeringTrainer portal for a year after the date of the training allowing you to refresh your knowledge or review material if needed.
Please note that for privacy reasons no recordings of the live sessions are made or provided.
Yes, interactive Q&A sessions are part of the live sessions in this course and allow you to interact with the instructor and ask questions.
To respect the privacy of the participants the live sessions will not be recorded, and as such the live sessions cannot be played back. Therefore it is important for all participants to block the time slots of the live sessions in their calendars and be present.
No software licenses are provided as part of this course.
Yes, this course qualifies for PDH hours as per the NCEES CPC Guidelines.
This course specifically is accredited by the South African Institution of Mechanical Engineering (SaiMechE); participants may claim three (3) CPD credits for attending this course.
Related Courses
Virtual Training
Smart 3D - Caesar II Interface: Optimizing your Caesar II Model Building through PCFs
By: Gerónimo Zamora García
