Masterclass: Satisfying the EU Pressure Equipment Directive (PED) for ASME B31.3
-
Autumn 2025
-
2 Hour Session
-
Interactive Q&A
-
Trusted by professionals
-
Certification included
Why take this course?
This masterclass focuses on aligning ASME B31.3 with the PED requirements within the EEA. You'll explore Appendix N, stress factor adjustments, and integration with harmonised standards like EN 13480, helping you understand the required adaptations for compliance.
What you'll learn
After this live masterclass you,
• know how ASME B31.3 design limits need to modified when conforming to PED
• familiar with the PED safety requirements in B31.3 Appendix N
• have seen an example of using the ASME B31.3 within the PED framework
• understand how to use ASME B31J SIF values within an EN 13480 stress analysis
• have been able to engage in discussions with an experienced engineer with indepth knowledge of using the ASME B31.3 with the PED framework.
-
Autumn 2025
-
Instructor-Led 2hr Duration
-
Online Live Session
About the course
The Pressure Equipment Directive (PED) provides a set of rules and processes which are compulsory for the design, manufacturing and trade of pressurized equipment used within the European Economic Area (EEA). How should the most widely used piping design code ASME B31.3 be used within the EEA, what extra criteria must be applied to ensure that the ASME B31.3 design systems conform to the PED.
In this live instructor led session you will be taken through the PED safety requirements in B31.3 Appendix N. By referring to the PED and harmonized codes such as the EN 13480 it will be shown, with the use of examples, what provisions are required on the factors and allowable stresses in ASME B31.3, and how your stress analysis results may be affected. In addition to this the use and application of ASME B31J within the EN 13480 code framework will be explained.
This course includes
-
Masterclass
-
Autumn 2025
-
2 PDH Credits
-
English
-
MAS511B
Meet your instructor
Nikola Jacimovic
Senior Stress Engineer, Stressman Engineer, ASME B31.3 Code Committee Member
Who should attend this course
Those involved in piping projects where PED compliance needed and the ASME B31.3 design code is being used:• Engineers
• Engineering Managers
• Manufacturing Managers
• Project Managers
Prerequisites
Familiarity with basic techniques and processes involved in pressure equipment design and manufactureCertification
Related courses
Masterclass: Satisfying the EU Pressure Equipment Directive (PED) for ASME B31.3
Why choose EngineeringTrainer
-
Live Interaction with Experts
-
Advance Technical Competences
-
Courses by Industry Authorities
Live session with an experienced engineer with indepth knowledge of using the ASME B31.3 within the PED framework.
Will we see you in the session?