Regular fee € 599
6 modules, 9 hrs total
Dynaflow & Paulin Research Group
Learn from home
100% online training
Video lectures by experts
watch multiple times
1-year unlimited access
Receive Personal Certificate
and prove your knowledge
Dynaflow Research Group currently applies a 50% discount to all its online courses to service its
customers during these challenging times,
Regular fee: € 599,-
Current fee: € 299,-
About the course
9 hrs of videos
This self-paced course teaches you all the fundamentals, and much more, of working with NozzlePRO.
Not just the basics. In this course, you will learn many different aspects of the NozzlePRO software, such as using the different Finite Element templates, set-up of you loads, model verification, viewing & post-processing your results and the relevance of the ASME VIII-2 stress categorization and compliance checks.
The course allows you to learn at your own pace and is fully provided online. The training is suitable for both new users as experienced users that want to learn more about the different features of the software.
Questions? Contact us
+31 (0)85 058 0051
Monday - Friday, 9am - 6pm CEST
Meet your instructors
Program & Details
Welcome to the course
How to use this course
Personal Certificate requirements
Introduction to Finite Element Analysis [10min]
A basic set of FEA equations [6min]
Mesh resolution & singularities [8min]
FEA for ASME VIII designs [5min]
Equivalent stresses [9min]
Stress categorization as per ASME BPVC VIII-2 chapter 5 "Design by Analysis" [14min]
Exercise A: Stress categorization cases
Stress compliance checks for ASME BPVC VIII-2 ch.5 [20min]
The NozzlePRO Interface [4min]
Base shell types [5min]
Nozzle / Attachment types [7min]
Pipe size database [2min]
Working in MatPRO [6min]
Importing Nozzle Loads from Pipe Stress Software Manually [15min]
Orientation settings [5min]
Importing Nozzle Loads from Pipe Stress Software Automatically [6min]
Operating versus Design pressure [7min]
Visualizing your model [7min]
Visually verifying your model [12min]
Reviewing Results [10min]
Output Reports [9min]
Using the Batch Processor [7min]
Boundary Conditions [13min]
Model Parameters [11min]
Merge Nodes Tolerance [12min]
Nozzle Inserts [4min]
General Options [12min]
Run View Options [7min]
Header Opening/Plug [3min]
Engineering Details [6min]
Automatic Solution Convergence [7min]
Exercise B1: Vessel/Nozzle Geometry with nozzle end loads - Part 1 [PDF]
exercise B1: Video demonstration [19min]
Exercise B2: Vessel/Nozzle Geometry with nozzle end loads - Part 2 [PDF]
Exercise B2: Video demonstration [11min]
Exercise B3: Vessel/Nozzle Geometry with nozzle end loads - Part 3 [PDF]
Exercise B3: Video demonstration [4min]
Exercise C: Ellipsoidal Head [PDF]
Exercise C: Video demonstration [16min]
Exercise D: Using the Batch Processor [PDF]
Exercise D: Video demonstration [7min]
Modeling piping actions method I: Generating SIFs [20min]
Modeling piping actions method II: Including piping in your FEA [16min]
Why use nozzle-shell flexibilities? [4min]
Calculating nozzle flexibilities using NozzlePRO [7min]
Nozzle modeling in pipe stress software [5min]
The PRG sif/k module [14min]
Exercise E: Modeling Piping Actions [PDF]
Exercise E: Video demonstration [11min]
Shoe/Saddle Wizard [26min]
Exporting NozzlePRO output to .PDF [8min]
Course evaluation survey
Your Personal Certificate
Rate this course
Related resources & follow up
After this course, you...
are familiar with the NozzlePRO Interface & its modules,
know how to work with shell type FEA models,
understand the Options Menu & Boundary Conditions,
can correctly set nozzle loads,
know how to visually verify model settings & mesh,
can post-process your results,
understand Stress Categorization as per ASME BPVC VIII-2,
understand the associated Compliance Checks,
know how to model piping actions and calculate SIFs,
can calculate nozzle flexibilities and use them for pipe stress analysis.
This course is based on the latest release of the NozzlePRO software (v14.1).
Who should attend this course
Beginner NozzlePRO users that want to learn the foundations.
Intermediate NozzlePRO users that want to understand more about the different features.
Users of other PRG Suite & FE/Pipe.
Those that want to understand more about the capabilities of NozzlePRO.
Those conducting ASME VIII-2 assessments.
Prerequisites: No prior knowledge of NozzlePRO and FEA is required.
Access to the course.
After your purchase is confirmed you receive an account to the EngineeringTrainer online learning portal, where you find the course in your dashboard. After opening the course you will be guided step-by-step through the different modules. You receive 1-year unlimited access to the course. This allows you to perform modules again if this is beneficial for your work projects.
Learn by doing.
The course is mainly based on video content: video lectures and video software demonstrations. English subtitles is available and videos can be viewed as many times as desired. The video lectures help you to grasp the important technical concepts and in the video demonstrations the instructor uses the software and discusses all the steps and actions. You are recommended to follow the steps of the instructor in the software to optimize your learning curve.
Exercises are available in the form of multiple choice quizzes to help you grasp technical concepts and in the form of .pdf-files with instructions to build and analyze different models and answer related questions. Video demonstrations of the exercises are available.
This course is self-paced and is not subject to specific dates. The course contains 6 modules with a total of 9 hours of content which can be performed at your own pace. A Personal Certificate will be provided to you if you finish the course within the first month after purchase. This incentive will motivate you to perform the course quickly thereby improving your learning curve.
You receive 1-year unlimited access to all 6 modules. This allows you to perform modules again whenever you want to refresh knowledge for your daily work projects.
A personal digital certificate will be made available to participants based on the following requirement:
finish the course within the first month after purchase. This incentive will motivate you to perform the course quickly thereby improving your learning curve.
Because of the current work-from-home conditions around the world as a result of the COVID-19 virus an active NozzlePRO license is not mandatory.
Exercise answers by demonstrations (video)
Multiple choice questions that help understand technical concepts
The majority of training material are videos. These are not available for download, but can be accessed directly with your account on the portal. Apart from quizzes the exercise files can be downloaded. These can include .pdf files with the exercise questions, software models or other file types. You receive 1-year unlimited access to the course. This allows you to watch content again if this is beneficial for your work projects.
We encourage participants to submit feedback and questions. These form the basis for new, future videos that will be added to the online course, but they will not be answered to the student directly.
Participants receive 1-year unlimited access to the course including new videos that are added during this year. Participants receive an email notification upon addition of new course videos.
An active NozzlePRO license is recommended for this course. This is not included in the course. Please contact us for questions on this matter.
Because of the current work-from-home conditions around the world as a result of the COVID-19 virus an active license is not mandatory!